The 3-Panel Scout Trailer, designed by Infinite Protection LTD, combines robust solar technology with advanced surveillance capabilities. This guide provides an overview of its operation, safety protocols, and maintenance procedures to ensure optimal performance.

Introduction

The 3-Panel Scout Trailer is an advanced mobile surveillance solution, powered by solar energy. This unit is tailored for both temporary and long-term applications in various environments. Users must read the manual thoroughly to understand the setup and operation of the trailer.

Key Specifications

• Model: SCOUT-3P-G
• Dimensions: 11ft x 6.5ft x 9ft
• Weight: 3,500 lbs
• Battery Capacity: 450Ah, DC24V (6 x 150Ah batteries)
• Solar Panels: 3 panels, each rated at 435W
• Tower Height: 30ft (electric operation)
• Run Time: 120 hours with a 200W load

Operating Safety

• Place the trailer on firm, level ground and ensure the outriggers are extended before raising the tower.
• Keep the area clear of people and overhead obstructions when operating the tower.
• Ensure the trailer is well-grounded to prevent electrical hazards.
• Always check cables and ropes for wear and ensure they are properly aligned.

Setup and Operation

Trailer Setup

1. Position the trailer on a stable surface.
2. Apply the hand brake and block the wheels.
3. Extend and level the outriggers for stability.

Solar Panels

1. Slide out the solar panels and secure them in place using the locking pins.
2. Adjust the panels to face the sun directly for maximum efficiency.
3. Turn on the breakers for solar panels and batteries in the control cabinet.

Raising the Tower

• Electric Winch:
  1. Check the mast ropes and electrical cord for damage.
  2. Tighten the steel ropes and press the "Extend" button on the controller to raise the mast.
  3. Once the desired height is reached, insert the locking pin.
• Manual Winch (Optional):
  1. Follow the same pre-check steps as for the electric winch.
  2. Crank the winch clockwise to elevate the mast.

Lowering the Tower

1. Check for wear or damage on ropes and cords.
2. Remove the locking pin and use the winch controller to lower the mast safely.

Maintenance

• Ropes and Cables: Lubricate annually and clean regularly to prevent wear.
• Electrical Components: Inspect for loose connections or damage.
• Hydraulic System (if equipped): Check oil levels and inspect for leaks.
• Tires and Brakes: Regularly check for wear and ensure proper inflation.

Safety Notes

• Never operate the winch in neutral mode while raising or lowering the mast.
• Avoid using the trailer in high winds or during electrical storms.
• Disconnect power sources during maintenance.

Towing Safety

• Ensure the towing vehicle’s hitch is rated for the trailer’s weight.
• Verify that lights, brakes, and safety chains are functioning properly.
• Adhere to a maximum speed of 65 mph on highways and slower speeds on rough terrain.

The 3-Panel Scout Trailer is a state-of-the-art surveillance unit that, when operated correctly, provides reliable, sustainable security solutions. For further assistance, contact Infinite Protection LTD’s support team at 844-637-1350 or visit their website.